Publicidad
Idiomas disponibles
Idiomas disponibles
User Mainte-
nance Instruc-
tions
Cleaning and Care
TO AVOID RISK OF ELECTRIC
SHOCK!
Always disconnect
the
appliance from the power
outlet before cleaning.
Never clean the washing
machine with a pressure washer.
TO AVOID RISK OF EXPLO-
SION!
Never use flammable
solvents
to clean the appliance.
Cleaning the appliance
housing and control
panel
As required:
Use hot soapy water or a mild,
non-abrasive
cleaning
agent.
Rub dry with a soft towel.
Cleaning the drum
If rust spots have formed due to
left-over debris (e.g. coins, paper
clips, nails):
_3
Use a chlorine-free
cleaning
agent. Follow the
manufacturer's
instructions.
Never use steel wool.
Cleaning the detergent
dispenser
If residual detergents
or additives
have accumulated
or if softener/bleach
are not fully
rinsed out:
_3
Open the flap of the detergent
dispenser.
_3
_3
Pull out the softener/bleach
compartment
in a vertical
direction and remove.
Clean the detergent
dispenser
insert under running water.
This can be disassembled
into
two parts!
Insert the detergent
dispenser
until it clicks into place.
Cleaning water inlet
strainers
This is necessary if very little or no
water flows into the washing
machine.
First
release
the water
pressure
in the
supply
hoses:
Turn off the water taps.
Turn the program
selector to
any program
(except spin or
drain).
Press start/pause
button and
wait for "Water tap closed?"
message.
Turn the program
selector to
off.
Cleaning
the strainer(s)
on the
water tap
On both the hot and cold water tap:
Disconnect
the hose from the
water tap.
Rinse the strainer under flowing
water.
Reconnect
the hose.
3O
Publicidad
