Descargar Imprimir esta página

Siemens UltraSense Plus WFXD8400UC Operación, Cuidado Y Instrucciones Para La Instalación página 21

Publicidad

Idiomas disponibles

Idiomas disponibles

Programs
and Functions
Cycle time will vary depending
on
cycle selected,
temperature
and
pressure of incoming
water, water
hardness,
size of load, type of
fabrics and distance
of unit from the
drain.
The maximum
spin speeds of the
programs
are dependent
upon the
cycle. For adjusting the spin speed,
see page 26.
Basic programs
regular/cotton
tempPlus
Regular/Cotton
settings are
intended to be used for heavily
soiled and/or stained colorfast
fabrics. Sturdy, hard-wearing
items
made of cotton or linen such as
towels, sheets or white sports
socks.
regular/cotton
hot
Normally and/or heavily soiled
colorfast fabrics. Sturdy, hard
wearing
items made of cotton
or linen such as work clothes and
underwear.
regular/cotton
warm
Lightly and/or normally soiled
non-colorfast
fabric. Sturdy, hard
wearing
items made of cotton
or
linen such as jeans, T-shirts and
sweatshirts.
regular/cotton
cold
Lightly soiled non-colorfast
fabric.
Sturdy, hard wearing items made
of cotton or linen (colors that may
bleed or fade).
permanent
press hot
Items consisting
of normally soiled
colorfast
cotton,
permanent
press,
linen, synthetic
or blended fabrics
and outer garments.
Clothes
requiring a special tumble sequence
and spin speed to minimize
creasing.
permanent
press warm
Items consisting
of lightly and/or
normally soiled non-colorfast
cotton,
permanent
press, linen,
synthetic
or blended fabrics and
outer garments.
Clothes requiring a
special tumble sequence
and spin
speed to minimize creasing,
such
as blouses,
shirts and overalls.
permanent
press cold
Items consisting
of lightly and/or
normally soiled non-colorfast
cotton,
permanent
press, linen,
synthetic
or blended fabrics and
outer garments.
Clothes requiring a
special tumble sequence
and spin
speed to minimize creasing.
Special programs
delicates
Deticates
settings are intended
for
use with delicate easy care items
made of cotton, satin, synthetic
or
blended fabrics and curtains,
dresses, skirts and blouses.
Bulky items, e.g. comforters,
can
be washed with this cycle because
of gentle action and additional
rinse
(automatically
added).
No spinning between
rinse cycles.
hand wash
Hand Wash settings are intended
for very delicate easy care items
that usually require hand washing.
These cycles have been specifically
designed
to provide extremely
gentle treatment
of fabrics.
Silk or other items marked with the
"hand wash" symbol _ on the care
label can be safely washed with this
cycle.
woolCare
Woolens (machine wash and hand
wash).
active
wear
For outdoor
clothing.
sanitary
Sanitary cycle for cleaning stained
cotton
colorfast
items.
spin
Spin cycle for spinning wet, hand
washed laundry.
Water is drained before and during
the spin cycle.
soak
A cycle for pre-treatment
of heavily
stained items. The soak cycle lasts
2 hours and ends with a short spin
cycle. All the water is pumped
out.
drain
Can be used to drain water without
a spin cycle.
Temperature
Settings
The following
wash temperatures
are available:
sanitary:
155 °F (68 °C)
tempPlus:
150 °F (66 °C)
(only regular/cotton)
hot:
125 °F (52 °C)
warm:
95 °F (35 °C)
cold:
60 °F (15 °C)
Maximum
spin speeds
of the
programs
Revolutionsper
Type of
minute
laundry/Extra
cycle
1200
regular/cotton
800
permanent p ress
600
delicates
400
handwash
800
w001Care
600
activewear
1200
sanitary
1200
spin
400
soak
In the regular/cotton,
sanitary
and
spin programs
the fabrics will be
spun at the maximum
possible spin
speed.
In the permanent
press,
woolCare,
soak,
delicates,
hand
wash and active
wear
programs,
the washing machine spins at a
lower spin speed for gentle
treatment.
If required you can reduce the spin
speed of laundry, minimum
is
400 revolutions
per minute.
2O

Publicidad

loading