Broan-NuTone RANGEMASTER RM60000 Serie Manual De Instalación Y Utilizacion página 9

14. INSTALL FILTERS
It is recommended to instal! side filters first and finish with center one(s).
1. Insert upper end of filter into the hood (finger sized cup side).
2. Raise lower end toward the inside of hood.
3. Position rear part of filter into channel and pull.
4. Usin( finger sized cup, pull on the upper end of filter and slide it under the front inner retaining piece.
\\\\
\
\\\\\
HDO065
HD0024
Replacement filters are available from your dealer. See label inside hood for size and part number.
Baffle Filters
Baffle filters are available as an option_ To order them, refer to the table below to find the right filter kit number for your hoe& To install
them, refer to instruction sheet included with baffle filter kit.
HD0011
BAFFLE FILTER (TYPICAL)
KIT # HOOD WIDTH
RBF6030 30"
RBF6036 36"
RBF6042 42"
RBF6048 48"
RBF6054 54"
RBF6060 60"
RBF6066 66"
RBF6072 72"
_9 _