Publicidad
Idiomas disponibles
Idiomas disponibles
1.0 WU14 COOLING UNIT
1.1 TECHNICAL DATA
Supply voltage
Frequency
Maximum absorbed power
Protection rating
Tank capacity
Weight including cooling unit
Dimensions (HxWxD)
1.2 DESCRIPTION OF PARTS
Fig. 1 Front control panel
Water connector A1: is connected to the delivery
pipe of the TIG torch.
Water connector A2: is connected to the return
pipe of the TIG torch.
Sliding lock I2: allows access to the reservoir of the
cooling unit, to fill it up.
230 V
50/60 Hz
300 W
IF23
4.2 l
20.4 Kg
220x235x560
Fig. 2 Rear control panel
Plug S1: is used to give electrical power to the cooling
unit.
Connector J4: through this the cooling supplies the gene-
rator with all the signals necessary for the plant to operate
correctly.
Water connector A3: is connected to the deli-
very pipe of the MIG/MAG torch.
Water connector A4: is connected to the return
pipe of the MIG/MAG torch.
7
Publicidad
