Publicidad
Idiomas disponibles
Idiomas disponibles
This manual is consistent with the date of manufacture of
your machine, you will find information on the technical
data of the machine acquired manual check for updates
of our machines on the website: www.grupostayer.com
1. Safety instructions
General Power Tool Safety Warnings.
Read
all
safety
illustrations and specifications provided with
this power tool. Failure to follow all instructions listed
below may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains
operated (corded) power tool or battery-operated (cord-
less) power tool.
1.1 Work area safety
Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
- Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases
or dust. Power tools create sparks which may ignite the
dust or fumes.
- Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
1.2 Electrical safety
- Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs
with
earthed
Unmodified plugs and matching outlets will reduce risk
of electric shock.
- Avoid body contact with earthed or grounded
sur-faces, such as pipes, radiators, ranges and
refrigerat-ors. There is an increased risk of electric
shock if your body is earthed or grounded.
- Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of elec-
tric shock.
- Do not abuse the cord. Never use the cord for carry-
ing, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
- When operating a power tool outdoors, use an
exten-sion cord suitable for outdoor use. Use of a
cord suit-able for outdoor use reduces the risk of electric
shock.
- If operating a power tool in a damp location is un-
avoidable, use a residual current device (RCD)
protec-ted supply. Use of an RCD reduces the risk of
electric shock.
1.3 Personal safety
- Stay alert, watch what you are doing and use
common sense when operating a power tool. Do not
use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment
of inatten-tion while operating power tools may result in
serious per-sonal injury.
warnings,
instructions,
(grounded)
power
tools.
ENGLISH
15
- Use personal protective equipment. Always wear
eye protection. Protective equipment such as a dust
mask, non-skid safety shoes, hard hat or hearing
protection used for appropriate conditions will reduce
personal in-juries.
- Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the
switch or en-ergising power tools that have the switch
on invites acci-dents.
- Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal
in-jury.
- Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
- Dress properly. Do not wear loose clothing or
jew-ellery. Keep your hair and clothing away from
moving parts. Loose clothes, jewellery or long hair can
be caught in moving parts.
- If devices are provided for the connection of dust
ex-traction and collection facilities, ensure these are
con-nected and properly used. Use of dust collection
can re-duce dust-related hazards.
1.4 Power tool use and care
- Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
de-signed.
- Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
- Disconnect the plug from the power source and/
or re-move the battery pack, if detachable, from
the power tool before making any adjustments,
changing ac-cessories, or storing power tools. Such
preventive safety measures reduce the risk of starting
the power tool accidentally.
- Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
- - Maintain power tools and accessories. Check for
mis-alignment or binding of moving parts, breakage
of parts and any other condition that may affect the
power tool's operation. If damaged, have the power
tool repaired before use. Many accidents are caused
by poorly maintained power tools.
- Keep cutting tools sharp and clean. Properly main-
tained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
- Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
ac-count the working conditions and the work to
be per-formed. Use of the power tool for operations
different from those intended could result in a hazardous
situation.
15
es
gb
it
fr
p
tr
pl
cz
el
si
Publicidad
