RIDGID K-750 Manual Del Usuario página 19

6. Reverse steps 2-5 to reassemble a drum to the K-750
frame. Exercise care when standing the machine
up to tighten the drum bolt.
Maintenance Instructions
WARNING
FOR/OFF/REV switch should be OFF and machine
unplugged before performing any maintenance.
Always wear safety glasses and RIDGID drain clean -
ing gloves and other appropriate protective equip-
ment when performing any maintenance.
Cleaning
The machine should be cleaned as needed with hot,
soapy water and/or disinfectants. Do not allow water to
enter motor or other electrical components. Make sure
unit is completely dry before plugging in and using.
Cables
Cables should be thoroughly flushed with water after
every use to prevent damaging effects of sediment and
drain cleaning compounds. Flush cable with water and
drain debris from drum by tipping machine forward after
every use to remove sediment, etc. which can corrode
cable.
To help prevent corrosion during storage, cables can be
coated with RIDGID Cable Rust Inhibitor. Once the cable
is clean and dry, pull the cable from the drum. While
manually feeding the cable back into the drum, wipe the
Cable Rust Inhibitor on the cable with a cloth.
Do not apply the Cable Rust Inhibitor to a rotating
cable. The cloth and your hand can become entangled in
the cable, and Cable Rust Inhibitor can be slung from ro-
tating cable.
AUTOFEED
After each use, hose out AUTOFEED assembly with
water and lubricate with lightweight machine oil.
Lubrication
Lubricate motor as per instructions on motor.
Lubricate machine with general purpose grease at
grease fitting (located at connection of guide tube and
drum) If drum is changed or removed, once a week if
used every day: once a month if used less.
Front Guide Hose
After use, flush the guide hose with water and drain.
When dry, a small amount of Cable Rust Inhibitor can be
placed in the guide hose to help keep it flexible.
278-104-411.10_REV F
K-750 Drain Cleaning Machine
Accessories
WARNING
To reduce the risk of serious injury, only use ac-
cessories specifically designed and recommended
for use with the RIDGID K-750 Drain Cleaning Ma -
chine, such as those listed below. Other Ac ces -
sories suitable for use with other tools may be
hazardous when used with the K-750 Drain Clean -
ing Machine.
Inner Core (IC) Cables
Good flexibility and more cleaning power to the cable end.
Catalog Model
No. No.
92460 C-25
92465 C-26
92470 C-27
43647 C-24
5/8" (16mm)
92475 C-28
92480 C-29
41212 C-75
3/4" (20mm) 41697 C-100
Hollow Core Cables
Catalog Model
No. No.
32737 C-27HC 75' HC Cable (22.9m)
58192 C-24HC 100' HC Cable (30.5m)
5/8" (16mm)
47427 C-75HC 75' HC Cable (22.9m)
47432 C-100HC 100' HC Cable (30.5m)
3/4" (20mm)
Leaders and Pig Tails
Catalog Model
No. No.
92555 T-458
92560 T-468
44122 —
44117 —
Accessories
Catalog Model
No. No.
43637 A-7558
41982 A-7534
43642 A-75
41992
49032
46015 E-453
41937 —
70032 —
59360 A-3
59987
31487 A-7570
92805 A-6582
92810 A-6583
31492 A-7571
92880 B-6840
92885 B-6841
Description
25' IC Cable (7.6m)
50' IC Cable (15.2m)
75' IC Cable (22.9m)
100' IC Cable (30.5m)
25' IC Cable (7.6m)
50' IC Cable (15,2m)
75' IC Cable (22.9m)
100' IC Cable (30.5m)
Description
Description
5 ⁄ " x 2' Leader
8
3 ⁄ " x 2' Leader
4
5 ⁄ " Pigtail, 4 1 ⁄ " Long
8 2
3 ⁄ " Pigtail, 6" Long
4
Description
Drum Assembly w/ 5 ⁄ " Pigtail
8
Drum Assembly w/ 3 ⁄ " Pigtail
4
AUTOFEED Assembly
C-100IC Kit w/Tools, 3 ⁄ " x 100'
4
Front Guide Hose Assembly
Allen Wrench
RIDGID Leather Drain Cleaning Gloves
RIDGID PVC Drain Cleaning Gloves
Tool Box
Cable Rust Inhibitor 1 GAL.
5 ⁄ " Repair Splicer
8
5 ⁄ " Male Coupling
8
5 ⁄ " Female Coupling
8
3 ⁄ " Repair Splicer
4
3 ⁄ " Male Coupling
4
3 ⁄ " Female Coupling
4
17