Rubi DC-250 PYTHON Instrucciones Originales página 12

ENGLISH · TRANSLATION OF THE ORIGINAL ·
EN
a) Position the component so that the protrusion on the alignment device
touches the outermost face of the blade at the front. To do this, rotate
the blade until it comes into contact, you will notice a slight noise when
the blade comes into contact with the protrusion. Mark that point as a
reference (fig. 29).
b) Move the blade head, without changing the position of the alignment
device (fig. 30) and turn the blade again to the indicated mark. If the
blade does not make contact at the same point, it will be necessary to
adjust the parallelism of the blade.
c) You can adjust the position of the motor by rotating it slightly.
d) Loosen screws A as indicated and rotate the motor using transversal
screw B. Repeat the same procedure and make sure that in both positions
the blade makes contact with the alignment device (fig. 31, 32).
e) Once the blade is positioned, retighten screws A.
STORAGE
Store the tool in its packaging in a cool, dry place protected against cold and
direct sunlight.
The machine must be put out of service and dismantled in accordance with
the instructions in each country, at a selective collection point for the proper
classification and processing of the materials.
AFTER-SALES SERVICE
Use only original spare parts supplied by the manufacturer. Repairs should
only be done by certified workshops or RUBI's technical service:
GERMANS BOADA SANTA OLIVA
Ronda de l'Albornar, 24-26
43710 Santa Oliva, Tarragona (Spain)
Tel: +34 977 16 90 50
For more information and the location of RUBI's official technical
support centres visit: https://www.rubi.com/es/servicio-post-venta
4. EU DECLARATION OF CONFORMITY
We, GERMANS BOADA S.A.
Of Avda. Olimpíades, 89-91; 08191 Rubí (Barcelona), Spain
Declare that the DC-250 PYTHON
Model: DC-250 PYTHON 1200 (REF.: 56939), DC-250 PYTHON 1200 (REF.:
56943), DC-250 PYTHON 1200 (REF.: 56947), DC-250 PYTHON 1200 (REF.:
56914), DC-250 PYTHON 850 (REF.: 56941), DC-250 PYTHON 850 (REF.:
56937), DC-250 PYTHON 850 (REF.: 56938), DC-250 PYTHON 850 (REF.:
56911), DC-250 PYTHON 1200 (REF.: 56949)
Meets all relevant requirements of the following European directives
2006/42/EC Machinery Directive
2014/35/EU Low Voltage Directive
2014/30/EU Electromagnetic Compatibility
Using the following draft and transposed standards
EN ISO 12100:2010, EN 60204-1:2018, EN 12418:2000+A1:2009, EN 62841-
1:2015, EN IEC 61000-6-4:2019, EN IEC 61000-6-2:2019, EN IEC 61000-3-2:
2019, EN 61000-3-3: 2013+A1:2019
Having been type examined to the requirements of the Electromagnetic
Compatibility Directive 2014/30/EU, the Machine Directive 2006/42/EC and
the Low Voltage Directive 2014/35/EU by:
Safenet Certification Services Ltd
Ducart Suite
Castletroy Park Commercial Campus
Limerick, V94 Y6FD, Ireland
Safenet Certification Services is authorised to compile the technical file in
the European community.
Safenet is authorised to compile the technical file.
Carles Gamisans
Deputy Manager
2022.04.19
Seal
- 12 -
Notification number: 2805
4.1. UK DECLARATION OF CONFORMITY
We, GERMANS BOADA S.A.
Of Avda. Olimpíades, 89-91; 08191 Rubí (Barcelona), Spain
Declare that the DC-250 PYTHON
Model: DC-250 PYTHON 1200 (REF.: 56939), DC-250 PYTHON 1200 (REF.:
56943), DC-250 PYTHON 1200 (REF.: 56947), DC-250 PYTHON 1200 (REF.:
56914), DC-250 PYTHON 850 (REF.: 56941), DC-250 PYTHON 850 (REF.:
56937), DC-250 PYTHON 850 (REF.: 56938), DC-250 PYTHON 850 (REF.:
56911), DC-250 PYTHON 1200 (REF.: 56949)
Meets all relevant requirements of the following UK Statutory Instruments
Supply of Machinery (Safety) Regulations 2008 as amended
Electrical Equipment (Safety) Regulations 2016 as amended
Electromagnetic Compatibility Regulations 2016 as amended
Using the following draft and transposed standards
BS EN ISO 12100:2010, BS EN 60204-1:2018, BS EN 12418:2000+A1:2009, BS
EN 62841-1:2015, BS EN IEC 61000-6-4:2019, BS EN IEC 61000-6-2:2019, BS
EN IEC 61000-3-2: 2019, BS EN 61000-3-3: 2013+A1:2019
Having been type examined to the requirements of the Electromagnetic
Compatibility Directive 2014/30/EU, the Machine Directive 2006/42/EC and
the Low Voltage Directive 2014/35/EU by:
Safenet Limited
Denford Garage
Denford, Kettering Approved body number: 1674
Northants.
NN14 4EQ, U.K.
Safenet is authorised to compile the technical file.
Carles Gamisans
Deputy Manager
2022.04.19
Seal
5. IMAGES
6. TECHNICAL CHARACTERISTICS
7. THE OVERALL MACHINE
8. CABLE WITH PLUG
9. ACCESSORIES
10. ELECTRICAL CIRCUIT
11. VIBRATION TEST
12. WASTE MANAGER
13. WARRANTY
PAGE 124
PAGE 128
PAGE 129
PAGE 129
PAGE 129
PAGE 130
PAGE 131
PAGE 134
PAGE 136