Rubi DC-250 PYTHON Instrucciones Originales página 9

CONTENTS
1. USING THE MACHINE
COMPONENTS / ELEMENTS OF THE MACHINE
2. SAFETY WARNINGS
2.1 SYMBOLS
2.2 PRECAUTIONS
2.3 WORK AREA
3. OPERATING INSTRUCTIONS
3.1 ASSEMBLY INSTRUCTIONS
3.2 STARTING THE MACHINE
3.3 CLEANING AND MAINTENANCE
1. USING THE MACHINE
RUBI electric cutters are professional precision machines, suitable for
cutting tiles, ceramics and other materials, either straight cuts or mitre cuts,
by means of a bearing guide system.
These cuts are made with water-cooled diamond blades.
COMPONENTS / ELEMENTS OF THE MACHINE
1) Hand grip
2) On/off switch
3) Motor bracket
4) Motor guide
5) Rear arm
6) Chassis/water tank
7) Aluminium table
2. SAFETY WARNINGS
2.1 SYMBOLS
READ THE INSTRUCTION MANUAL
CAUTION
BLADE DIRECTION OF ROTATION
ALWAYS WEAR SAFETY GLOVES
WEAR SAFETY GLASSES
ALWAYS WEAR HEARING AND EYE PROTECTION
WARNING: SAW CUTTING. RISK OF HARM IF NOT USED CORRECTLY
CE MARK
CONFORMS TO WEEE
2.2 PRECAUTIONS
General safety warnings for tools
WARNING! Read all of the safety warnings and all of the
instructions. Failure to observe all of the warnings and instructions
indicated below could result in electric shock, fire and/or serious injury.
Save all of the warnings and instructions for future reference.
SAFETY IN THE WORK AREA
a. Keep the work area clean and well lit. Dark and disorderly areas lead to
accidents.
b. Do not handle electrical tools in explosive atmospheres, such as in
the presence of flammable liquids, gases or dust. Electric tools generate
sparks that can ignite dust and fumes.
c. Keep children and bystanders away when handling an electric tool.
Distractions can result in a loss of control.
ELECTRICAL SAFETY
a. The plug of the electric tool must match the base of the electrical
outlet. Never modify the plug in any way. Do not use plug adapters
4. EU DECLARATION OF CONFORMITY
4.1. UK DECLARATION OF CONFORMITY
5. IMAGES
6. TECHNICAL CHARACTERISTICS
7. THE OVERALL MACHINE
8. CABLE WITH PLUG
9. ACCESSORIES
10. ELECTRICAL CIRCUIT
11. VIBRATION TEST
12. WASTE MANAGER
13. WARRANTY
8) Rear arm
9) Rotating stop
10) Wheels
11) Front blade cover
12) Rear blade cover
13) Instruction manual
· TRANSLATION OF THE ORIGINAL · ENGLISH
with grounded electric tools. Unmodified plugs and matching outlets will
reduce the risk of electric shock.
b. Avoid contact between the body and grounded surfaces such as
pipes, radiators, electric ranges and refrigerators. There is an increased
risk of electric shock if your body is grounded.
c. Do not expose electric tools to rain or damp conditions. Any water that
enters the tool will increase the risk of electric shock.
d. Treat the power cord with care. Do not use the power cord to carry, lift
or unplug the electric tool. Keep the power cord away from heat, oil,
sharp edges and moving parts. Damaged or tangled power cords increase
the risk of electric shock.
e. When handling an electric tool outdoors, use extension cords suitable
for outdoor use. Using extension cords that are suitable for outdoor use
reduces the risk of electric shock.
f. If using the tool in a damp area is unavoidable, use a power supply
that is protected by a residual current device (RCD). The use of an RCD
reduces the risk of electric shock.
PERSONAL SAFETY
a. Be alert and pay attention to what you are doing, and use common
sense when handling an electric tool. Do not use electric tools when
you are tired or under the influence of alcohol, drugs or medication.
A moment of distraction while handling electric tools can result in serious
personal injury.
b. Use personal safety equipment. Always wear eye protection. Using
safety equipment that is suited to the conditions, such as a dust mask, non-
slip footwear, helmet or hearing protection will reduce personal harm.
c. Avoid accidental startup. Make sure that the switch is in the "open"
position before plugging the machine in and/or connecting the
battery, picking up or carrying the tool. Carrying electric tools with your
finger on the switch or plugging in electric tools that have the switch in the
"on" position leads to accidents.
d. Remove any spanners or adjustment tools before starting the electric
tool. A spanner or tool connected to a rotating part of an electric tool can
result in personal injury.
e. Do not overextend. Keep your feet firmly on the floor and keep your
balance at all times. This gives you better control over the electric tool in
unexpected situations.
f. Wear suitable clothing. Do not wear loose clothing or jewellery. Keep
your hair, clothing and gloves away from moving parts. Loose clothing,
jewellery and long hair can become snagged in moving parts.
g. If there are devices for connecting suction and dust collection
equipment, make sure they are connected and used correctly. Using
these devices can reduce the risks related to dust.
h. The confidence gained from the frequent use of tools should not allow
general safety principles to be ignored. A careless action could cause a
serious injury in a fraction of a second.
USE AND CARE OF ELECTRIC TOOLS
a. Do not force electric tools. Use electric tools correctly for their proper
application. The proper electric tool will work better and safer at the speed
for which it was designed.
b. Do not use electric tools if the switch does not turn to "on" and "off".
Electric tools that cannot be controlled with switches are dangerous and
should be repaired.
c. Unplug the electric tool from the power supply and/or battery before
making any adjustments, changing accessories or storing the tools.
These preventive safety measures reduce the risk of accidentally starting
the tool.
d. Store electric tools out of reach of children when not in use and do
not allow people who are not familiarised with the tools or with these
instructions to handle the electric tool. Electric tools are dangerous in
the hands of untrained users.
e. Perform maintenance on electrical tools and accessories. Check
that the moving parts are not misaligned or locked, that there are no
broken parts or other factors that could affect the operation of the
electric tools. Electrical tools must be repaired before use when they
are damaged. Many accidents are caused by poorly maintained electric
tools.
f. Keep tools sharp and clean. The Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
g. Use the electric tool, accessories and tool tips, etc.. in accordance
with these instructions, taking into account the working conditions and the
work to develop. Use of the electric tool for applications other than those
intended could result in a hazardous situation.
h. Keep the handles and gripping surfaces dry, clean and free of oil and
grease. Slippery handles and gripping surfaces do not allow for a secure
grip and control of the tool in unforeseen circumstances.
TECHNICAL SERVICE
a. Have your electric tool checked by a qualified repair service using only
identical spare parts. This guarantees that the safety of the electric tool
will be maintained.
EN
- 9 -