Phoenix Contact ELR H5-IES-SC-24DC/500AC-0,6 Manual página 20

6. Technical data
Surge current
Input protective circuit
Short circuit current rating SCCR
as per UL 508/UL 60947-4-1A/UL 60947-1
Reply output
Contact type
Contact material
Max. switching voltage
Min. switching voltage
Max. continuous load current I
Min. switching current
Max. interrupting rating, Ohmic load
Measurement technology
(in ref. to the trigger characteristic, 8.1. )
Current measurement
Area
Symmetry monitoring
Amount I > I => (I
max nom
Amount I < I => (I
max nom
Response time
Blocking protection
I(L1) or I(L3)
Response time
Trigger characteristic (see diagram 8.1.) as per IEC 60947 -
Cooling time
Operating elements
Operating voltage display
Device and process error display
Activation display
Button
Potentiometer for nominal motor current setting
20
when used as Signal contact
o
24 V DC
48 V DC
60 V DC
110 V DC
220 V DC
250 V AC
- I / I )
max min max
- I / I )
max min nom
Reverse/forward running LED L (yellow) / LED R (yellow)
100 A (t = 10 ms)
Varistors
- suitable for use on a circuit capable of delive-
ring not more than 5 kA
500 V maximum
- suitable for use on a circuit capable of delive-
ring not more than 100 kA
peres, 500 V maximum when protected by a
30 A class J or CC fuse
Single contact, 1 PDT
Ag alloy, hard gold-plated
30 V AC / 36 V DC
100 mV
50 mA
1 mA
1.2 W
-
-
-
-
-
ELR...-0.6 ELR...-2
0.075...0.6 A 0.18...2.4 A
≥33 % / ≥67 % ≥33 % / ≥67 % ≥33 % / ≥67 %
≥33 % / ≥67 % ≥33 % / ≥67 % ≥33 % / ≥67 %
2 min. / 1.8 s 2 min. / 1.8 s
- -
- -
-
- -
LED PWR (green)
LED ERR (red)
Error acknowledgment
240°
symmetrical amperes,
rms
symmetrical am-
rms
Power contact
250 AC/DC
12 V AC/DC
6 A
10 mA
140 W
20 W
18 W
23 W
40 W
1500 VA
ELR...-9
1.5...9.0 A
2 min. / 1.8 s
> 45 A
2 s
Class 10A
20 min.