Publicidad
Idiomas disponibles
Idiomas disponibles
Installation and maintenance of any upstream electrical components must be performed by a qualified
electrician. Failing to do so may result in electric shock, serious injury, property damage, and even death.
Prior to any maintenance or operation, ensure that the sait chlorinator and any other devices are shut
down and the main power supply is off.
The sait chlorinator's external power adaptor must be connected to a main power supply separate from
the filtration system (no feedback contrai), equipped with a 30mA residual current device and an earthing
system.
The sait chlorinator must be plugged into an outlet located in a well-ventilated area to prevent overheating.
Do not plug the sait chlorinator into an outlet where it could be damaged by humidity or rain.
The person responsible for the installation must read this manual carefully. ln the event of a malfunction
or erroneous operation, please contact the nearest authorised reseller or technical support.
If a part is damaged, ensure a replacement is purchased from the manufacturer or an authorised reseller.
NON-COMPLIANCE WITH THESE WARNINGS CAN RESULT IN PROPERTY DAMAGE,
ELECTRIC SHOCK, COMPLICATIONS, SERIOUS INJURIES, OTHER INJURIES AND EVEN
WARNING - To avoid the risk of injury, do not allow children to operate this device.
WARNING - Intensive use of the pool, or periods of high temperature, may require an
increased level of chlorine production in order to maintain adequate levels of free
chlorine.
If used in an indoor swimming pool, under cover or cover, check the chlorine level
regularly (< 2ppm) and ventilate regularly.
|
24
EN
SAFETY INSTRUCTIONS
DEATH.
Publicidad
