Publicidad
Idiomas disponibles
Idiomas disponibles
o
Perating PrinciPLe
Salt chlorination of a pool works by using sait electrolysis to disinfect the water; this electrochemical
process converts the sait present in the water into a disinfectant (hypochlorite ions).
Once this process is complete, hypochlorite turns back into sait after coming into contact with organic
material (bacteria, cells) or under the effect of UV rays or other sources of light, starting the cycle over
again.
ln order to maintain a good level of disinfectant in the water, it is important to maintain:
• a proper concentration of sait in the water: 3 g/l
• Adequate filtration time (as a reminder, a good estimate is:
Filtration Time = T0 water / 2
• A good water balance with a pH between 7.0 and 7.8
(for more information see Taylor watergram)
• Regular cleaning of your pool to remove any plant debris
• ln case of frequent use, consider using the boost
function.
WARNING - Salt water chlorination alone will not clear up green water alone. ln the
event of algae appearing (e.g. after a period of high temperatures or frequent use),
it may be necessary to supplement with chlorine tablets. Do not put the chlorine
tablets directly into the skimmer; use a floating dispenser.
o
Perating Limits
The filtration time must be long enough and adapted to your pool. As with any pool, it's important to
maintain a good chemical balance in the water of your pool, including pH, alkalinity and water hardness.
When using an electrolyser, you need to maintain the right levels of salt and stabiliser to prevent corrosion
or scaling. It is recommended that you test all of the basic parameters of the water at least once per week.
For additional safety, we recommended getting your pool water tested by a professional at least twice
per season.
Your local pool store can provide you with the chemicals and steps you need to take to adjust the chemical
properties of your water. Don't forget to let them know that you use a salt chlorinator.
In addition, temperature plays a major role in the proper functioning of your chlorinator:
• A water temperature below 10°C will render the system inoperative (E2 alarm).
• Water temperatures higher than 32°C will reduce the effectiveness of hypochlorite. The addition of
chlorine tablets is recommended for consistently high temperatures; do not place chlorine tablets
directly into the skimmer, use a floating dispenser.
DESCRIPTION
+
Na Cl
|
EN
25
Publicidad
