Descargar Imprimir esta página

Melchioni Family VIRGINIA Manual De Instrucciones página 27

Freidora de aire inteligente

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Grant the app access to the various services required (e.g. geolocation,
Bluetooth).
Register on the app by creating an account.
Complete the steps related to the definition of the "Your home" settings (e.g.
house name, GPS position, etc.).
On the main page of the app, tap "Add device" (alternatively you can use the
"+" button in the top right corner).
The app will locate the appliance on the local network, showing its name at the
top of the display.
Tap "add" and follow the subsequent instructions on the mobile device display.
If the appliance is not shown, tap "Add device" again, then select "Kitchen"
from the list on the left, select "Virginia" and follow the next instructions on the
display of the mobile device.
Once the connection is complete, icon A remains permanently lit on the display.
To connect the appliance to a different Wi-Fi network, even if the one in use needs to
be changed (e.g. change of provider), or if a connection attempt is unsuccessful:
Remove the device from the app.
Proceed to reset the connection by tapping G icon for five seconds. An acoustic
signal will confirm the removal of the previous Wi-Fi settings.
Re-connect to the new network as described above.
5.
COMMISSIONING AND FIRST START-UP
Some preliminary operations are necessary before first use. Proceed as follows:
 Unpack the appliance and check the conditions and completeness of the equipment,
as indicated in the previous chapter.
 Keep the packaging for 15 days in case it needs to be returned to the retailer; after this
period, dispose of it in accordance with the instructions on the separation of materials
indicated on it.
 Read this manual in its entirety, paying particular attention to the instructions for safe
use.
 Carefully remove all possible fastening materials from parts, including internal parts.
 Fully remove any stickers from the surface of the appliance.
 Place the appliance on a flat, stable surface, taking care to reserve 10 cm of space on
all sides, at the rear and above the appliance for the necessary air circulation.
 Refer to chapter 2 for further details and instructions on appliance positioning and
installation.
26

Publicidad

loading

Este manual también es adecuado para:

118340034