Emiliana Serbatoi CTK220 Manual De Uso Y Mantenimiento página 26

– Kerosene (UN 1223)
– Methanol (UN 1230)
– General solvents and flammable liquids
– Corrosive substances, etc.
The characteristics of the materials used in the construction of the GIR/IBC and emptying device also make it unfit for transport of:
– Liquids with a viscosity > 20 cSt
– Water
– Food liquids
7.4. ENVIRONMENTAL CONDITIONS
– Temperature: -20° C to + 60° C
– Relative humidity: 90% max.
7.5. WORKING CYCLE
The machine is designed for 30 ' of continued use under conditions of nominal capacity.
Bypass operation (zero flow) may not exceed the maximum duration of 2 minutes.
8. PLATES AND INSCRIPTIONS
The tanks CTK and HIPPOTANK
tions for use:
[A] Identification plate CTK-HT + CE Marking
[B] Sticker with use warnings
[C] Rhomboid sticker 'flammable' with Class of portability and UN code corresponding to the transported material
[D] Environmental hazard sticker
[E] Sticker with stackability indications
For IBCs up to 450 litres only one label is sufficient.
For the IBC over 450 litres two labels on opposite sides are needed
EN
come supplied with the required identification labels and graphic stickers that contain the main instruc-
®
A 1202
26
A
MAN_CTK-HT_Rev.2 del 04.2021