Harbor Breeze LOCHWOOD Manual Del Usuario página 10

FAN INSTALLATION
7. Raise the decorative cover (I) up to the
threaded rod, align the center of the decorative
cover nut with thread rod on the bottom of
the fan motor. Secure it to the fan by turning
the decorative cover (I) clockwise until snug.
8. Carefully lift the fan motor assembly (F) up 5
to the mounting bracket (A) and seat the
downrod (D) in the mounting bracket (A)
socket. Make sure the tab on the mounting
bracket (A) socket is properly seated in the
groove in the downrod (D). This will help to
balance the ceiling fan.
DANGER: Failure to align slot in ball
with tab may cause the fan to wobble or fall,
which could result in serious injury or death.
7
Threaded
Rod
Nut
8
10
Tab
Groove