Harbor Breeze LOCHWOOD Manual Del Usuario página 7

INITIAL INSTALLATION
1. Turn off circuit breakers and wall switch to the
fan supply line leads.
DANGER: Failure to disconnect power
supply prior to installation may result in
serious injury or death.
2. Determine mounting method to use.
A. Standard mount
B. Angle mount
IMPORTANT: If using the angle mount, ensure
the ceiling angle is not steeper than 19°.
Helpful Hint: Standard mounting is best suited
for ceilings 7 ft. high or higher. For taller ceilings
you may want to use a longer downrod (not
included). Angle mounting is best suited for angled
or vaulted ceilings. A longer downrod is sometimes
necessary to ensure proper blade clearance.
3. Check to make sure blades (H) will be at
least 30 in. from any obstruction and at least
7 ft. above the floor.
1
2
A
19° max.
B
3
7 ft.
min.
6
7
30 in.
min.