Harbor Breeze LOCHWOOD Manual Del Usuario página 9

FAN INSTALLATION
4. Insert downrod (D) through canopy (B),
canopy bottom cover (C) and coupling cover
(E). Thread wires from fan motor assembly
(F) up through downrod (D).
5. Slip downrod (D) into collar, align holes and
re-install clevis pin and cotter pin. Tighten
two set screws in collar.
6. WARNING: To reduce the risk of personal
injury, do not insert foreign objects between
rotating fan blades (H).
Align the holes from the blade (H) to the
holes from the top housing and secure the
blade in place with blade support plate (with
screws and lock washers) (G) provided.
Repeat this procedure with the remaining
blades (H).
4
5
Collar
Cotter
Pin
Set Screw
6
9
Set Screw
Clevis Pin