Harbor Breeze LOCHWOOD Manual Del Usuario página 13

FINAL INSTALLATION
1. Make sure connections are neatly tucked
into the ceiling outlet box.
Slide the canopy (B) up to the mounting
bracket (A) and place the key holes on the
canopy (B) over the loose canopy mounting
screws on the mounting bracket (A). Turn
the canopy (B) clockwise until it locks in
place at the narrow section of the key holes.
Make sure the positioning pin on the mounting
bracket falls into one of two holes on the
canopy (B), and then tighten the two canopy
mounting screws.
2. Attach the canopy bottom cover (C) to the
canopy (B) by inserting the screw heads into
the key slots in the canopy bottom cover (C)
and rotating it clockwise.
NOTE: Adjust the canopy mounting screws as
necessary until the canopy (B) and canopy
bottom cover (C) are snug.
1
Positioning
Pin
2
Canopy
Mounting
Screw
13
Canopy Mounting
Screw