Fronius AL 2300 Manual De Instrucciones página 33

General
Device concept The MIG/MAG welding torches are especially suitable for welding aluminium,
CrNi and steel, and stand out for their wide range of different versions.
For instance, several different types of central connector are available, both with
external and internal coolant connections. There is also a highly diverse range of
different torch necks, ensuring good accessibility to weld-seams.
The torches can be adapted to deal with a huge variety of different tasks, and do
sterling service in the field of manual series and one-off fabrication, as well as in
the workshop sector.
Proper use The MIG/MAG manual welding torch is intended solely for MIG/MAG welding in
manual applications.
Any use above and beyond this purpose is deemed improper. The manufacturer
shall not be held liable for any damage arising from such usage.
Proper use includes:
-
-
Safety
Danger from incorrect operation and work that is not carried out properly.
This can result in serious personal injury and damage to property.
▶
▶
▶
Danger from electrical current.
This can result in serious personal injury and damage to property.
▶
▶
Danger from electric current due to defective system components and incor-
rect operation.
This can result in serious personal injury and damage to property.
▶
▶
Carefully reading and following all the instructions given in the operating in-
structions
Performing all stipulated inspection and maintenance work.
WARNING!
All the work and functions described in this document must only be carried
out by technically trained and qualified personnel.
Read and understand this document in full.
Read and understand all safety rules and user documentation for this device
and all system components.
WARNING!
Before starting work, switch off all devices and components involved and dis-
connect them from the grid.
Secure all devices and components involved so they cannot be switched back
on.
WARNING!
All cables, leads and hosepacks must always be securely connected, unda-
maged and correctly insulated.
Only use adequately dimensioned cables, leads and hosepacks.
33