Descargar Imprimir esta página

Fronius AL 2300 Manual De Instrucciones página 52

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 123
1.
2.
3.
4.
5.
Disposal
Waste electrical and electronic equipment must be collected separately and re-
cycled in an environmentally responsible manner in accordance with the EU Di-
rective and national law. Used equipment must be returned to the distributor or
through a local, authorised collection and disposal system. Proper disposal of the
old device promotes sustainable recycling of material resources. Ignoring this
may lead to potential health/environmental impacts.
Packaging materials
Collected separately. Check your municipality's regulations. Reduce the volume
of the box.
52
Insulating parts
-
notches
-
burned off or torn middle bar
-
scorched or torn-off shoulders
Nozzle fittings
-
notches and burns on the front edge
-
heavily covered in welding spatter
Spatter guard
-
burned-off outside edges, notches
Contact tubes
-
worn out (oval) wire entry and wire exit holes
-
heavily covered in welding spatter
-
burns on the tip of the contact tube
Gas nozzles
-
heavily covered in welding spatter
-
burned-off outside edges
-
notches

Publicidad

loading