Beurer EM 49 Instrucciones De Uso página 20
Ocultar thumbs
Ver también para EM 49:
- Instrucciones de uso (19 páginas) ,
- Instrucciones de uso (148 páginas) ,
- Instrucciones de uso (148 páginas)
Publicidad
Idiomas disponibles
Idiomas disponibles
1. Place the electrodes on the desired area for treatment (for placement suggestions see the 'Electrode Positioning' section) and
connect them to the device.
2. Select the TENS 15 program as described in section 'Starting Application' section, steps 3-5.
˄/˅
3. Use the
setting buttons to select an impulse frequency and use the ENTER button to confirm.
˄/˅
4. Use the
setting buttons to select a treatment time and use the ENTER button to confirm.
˄/˅
5. Use the left and right
EMS 33
In this program, you can set the impulse frequency between 1 and 150 Hz and the impulse width between 80 and 320 μs.
1. Place the electrodes on the desired area for treatment (for placement suggestions see the 'Electrode Positioning' section) and
connect them to the device.
2. Select the EMS 33 program as described in the 'Starting Application' section, steps 3-5.
˄/˅
3. Use the
setting buttons to select an impulse frequency and use the ENTER button to confirm.
˄/˅
4. Use the
setting buttons to select an impulse width and use the ENTER button to confirm.
˄/˅
5. Use the
setting buttons to select a treatment time and use the ENTERbutton to confirm.
˄/˅
6. Use the left and right
EMS 34
In this program, you can set the impulse frequency between 1 and 150 Hz and the impulse width between 80 and 450 μs. You
can also set the working time and pause time for this program between 1 and 30 seconds each.
1. Place the electrodes on the desired area for treatment (for placement suggestions see the 'Electrode Positioning' section) and
connect them to the device.
2. Select the EMS 34 program as described in the 'Starting Application' section, steps 3-5.
˄/˅
3. Use the
setting buttons to select the working time ('on time') and use the ENTER button to confirm.
˄/˅
4. Use the
setting buttons to select the pause time ('off time') and use the ENTER button to confirm.
˄/˅
5. Use the
setting buttons to select an impulse frequency and use the ENTER button to confirm.
˄/˅
6. Use the
setting buttons to select an impulse width and use the ENTER button to confirm.
˄/˅
7. Use the
setting buttons to select the treatment time and use the ENTER button to confirm.
setting buttons for
and
setting buttons for
and
to select an impulse intensity.
to select an impulse intensity.
20
Publicidad
