Beurer EM 49 Instrucciones De Uso página 24

Ensure that no water enters the device.
Storage
• Remove the batteries from the device if you will not be using it for a prolonged period. Leaking batteries may damage the
device.
• Do not make sharp bends in the connection cables and electrodes.
• Disconnect the connection cables from the electrodes.
• Reapply the electrodes to the carrier foil after use.
• Store the device and accessories in a cool, well-ventilated space.
• Never place any heavy objects on the device.
Disposal
Observe the local regulations for material disposal. Dispose of the device in accordance with local regulations. If you have any
questions, please contact the local authorities responsible for waste disposal.
14. Troubleshooting
The device does not switch when the ON/OFF button is pressed.
(
1) Ensure batteries have been inserted correctly and are in contact with the terminals.
(2) Replace batteries, if applicable.
(3) Contact Customer Services.
Electrodes do not adhere to the body.
(
1) Clean the adhesive surface of the electrodes using a damp, lint-free cloth. Replace the electrodes if they still do not adhere
securely.
(2) Clean the skin prior to any application; do not use skincare lotions or oils prior to treatment. Shaving may increase the life of
electrodes.
There is no noticeable stimulation.
(1) Press the ON/OFF button to interrupt the program. Check the connection cables are correctly connected to the electrodes.
Ensure the electrodes are in firm contact with the treatment area.
(2) Ensure the connection plug is firmly connected to the device.
(3) Press the ON/OFF button to restart the program.
24