Parker Hiross Hyperchill ICE001 Manual De Uso página 10

English
Index
1. Safety
2. Introduction
3. Installation
4. Control
5. Maintenance
6. Troubleshooting
7. Appendix
,
There are symbols whose meaning is given in the para. 7.1.
7.1 Legend
7.2 Technical data
7.3 Dimensions
7.4 Spare parts list
7.5 Circuit diagram
7.6 Wiring diagram
1 Safety
Importance of the manual
S Keep it for the entire life of the machine.
S Read it before any operation.
S It is subject to changes: for updated information see the ver-
sion on the machine.
Warning signals
!
Instruction for avoiding danger to persons.
Y
Instruction for avoiding damage to the equipment.
Z
The presence of a skilled or authorized technician is required.
Safety instructions
!
Every unit is equipped with an electric disconnecting switch
for operating in safe conditions. Always use this device in order
to eliminate risks maintenance.
!
The manual is intended for the end--- user, only for opera-
tions performable with closed panels: operations requiring open-
ing with tools must be carried out by skilled and qualified person-
nel.
Y
Do not exceed the design limits given on the dataplate.
! Y
It is the user's responsibility to avoid loads different
from the internal static pressure. The unit must be appropriately
protected whenever risks of seismic phenomena exist.
Only use the unit for professional work and for its intended pur-
pose.
The user is responsible for analysing the application aspects for
product installation, and following all the applicable industrial
and safety standards and regulations contained in the product
instruction manual or other documentation supplied with the
unit.
Tampering or replacement of any parts by unauthorised person-
nel and/or improper machine use exonerate the manufacturer
from all responsibility and invalidate the warranty.
The manufacturer declines and present or future liability for
damage to persons, things and the machine, due to negligence of
the operators, non--- compliance with all the instructions given in
this manual, and non--- application of current regulations regard-
ing safety of the system.
The manufacturer declines any liability for damage due to alter-
ations and/or changes to the packing.
It is the responsibility of the user to ensure that the specifications
provided for the selection of the unit or components and/or
options are fully comprehensive for the correct or foreseeable
use of the machine itself or its components.
IMPORTANT: The manufacturer reserves the right to modify
this manual at any time.
For the most comprehensive and updated information, the user
is advised to consult the manual supplied with the unit.
Hyperchill (ICE001)
Residual risks:
The installation, start up, stopping and maintenance of the ma-
chine must be performed in accordance with the information and
instructions given in the technical documentation supplied and
always in such a way to avoid the creation of a hazardous situa-
tion.
The risks that it has not been possible to eliminate in the design
stage are listed in the following table.
part residual manner of
affected risk exposure
heat exchanger
small cuts contact
coil
insertion of poin-
fan grille and ted objects through
lesions
fan the grille while the
fan is in operation
inside the unit:
compressor and burns contact
discharge pipe
defects in the insu-
intoxication, lation of the power
inside the unit:
electrical supply lines up-
metal parts and
shock, serious stream of the elec-
electrical wires
burns
trical panel; live
metal parts
fire due to short
circuit or overhea-
outside the unit:
ting of the supply
intoxication,
area surroun-
serious burns line upstream of
ding the unit
the unit's electrical
panel
8
precautions
avoid contact, wear
protective gloves
do not poke objects
of any type through
the fan grille or
place any objects
on the grille
avoid contact, wear
protective gloves
adequate electrical
protection of the
power supply line;
ensure metal parts
are properly con-
nected to earth
ensure conductor
cross ---sectional
areas and the sup-
ply line protection
system conform to
applicable regula-
tions