Publicidad
Idiomas disponibles
Idiomas disponibles
The battery won't just die suddenly; it gradually begins to perform
more poorly. If your battery suddenly stops working, it is normally due
to a technical problem and not the end of its lifespan.
Disposing of the battery
As with all batteries, the BATEC MOBILITY batteries
must be disposed of properly. Check with your local
waste-management centre. Contact BATEC MOBILITY if
you have any doubts.
Battery indicator operation
The battery status indicator is on the display (LCD panel) of the BATEC
ELECTRIC HANDBIKE. The indicator is made up of several bars that
indicate the % of energy available. (
IMPORTANT!
When the system detects that there is less than 20% battery charge
available, it can limit the HANDBIKE BATEC HIBRID to position 1 (maxi-
mum speed: 6 km/h or 3 km/h, depending on the model) to save power.
4.8.4. TECHNICAL SPECIFICATIONS OF THE 280 WH BATTERY
• Dimensions: 350 x 140 x 60 mm
• Weight: 2.6 kg
• Power: 280 Wh
• Voltage: 36 V
• Maximum discharge current: 29 A
– 32 –
See fig. 42)
• Maximum charge current: 5 A
• Internal resistance: 200 mOhm
• BMS consumption: < 0.2 mA when on; < 0.02 mA when off
• HANDBIKE BATEC HIBRID autonomy:
– HIBRID 2: 27 - 40 km
4.8.5. TECHNICAL SPECIFICATIONS OF THE 522 WH BATTERY
• Dimensions: 350 x 140 x 60 mm
• Weight: 4 kg
• Power: 522 Wh
• Voltage: 36 V
• Maximum discharge current: 29 A
• Maximum charge current: 5 A
• Internal resistance: 200 mOhm
• BMS consumption: < 0.2 mA when on; < 0.02 mA when off
• HANDBIKE BATEC HIBRID autonomy:
– HIBRID 2: 50 – 75 km
4.8.6. TECHNICAL SPECIFICATIONS OF THE 576 WH BATTERY
• Dimensions: 350 x 140 x 60 mm
• Weight: 3.9 kg
• Power: 576 Wh
• Voltage: 36 V
• Maximum discharge current: 29 A
• Maximum charge current: 5 A
– 33 –
Publicidad
