Bosch GCM18V-10SDN14 Instrucciones De Funcionamiento Y Seguridad página 51

Saw Operations
Cutting Round or Irregularly Shaped Material
For round material such as dowel rods or tubing, always use a
clamp (Fig. 60, 42) or a fixture designed to clamp the work-
piece firmly against the fence (12) and table (22). Rods have
a tendency to roll while being cut, causing the blade to "bite"
and pull the work with your hand into the blade.
Fig. 60
12
42
12
22
Round
material
-51-