Publicidad
Idiomas disponibles
Idiomas disponibles
- Ensure that the mains voltage matches the voltage specified
on the product rating label and that the plug is earthed.
- Always unplug the power supply before disassembling or
repairing the device.
- Make sure that the safety devices are working properly
before using the device. Do not remove or modify any parts
of the trigger gun or the product itself.
- It is very important to know how to stop the appliance and
release the pressure quickly before using it, and to become
thoroughly familiar with its operation.
- Stay alert to what you are doing during operation.
- Do not operate the machine when fatigued or under the
influence of alcohol or drugs.
- Do not use the device if its cord or any of its parts are
damaged, e.g., the safety elements, the high-pressure hose,
or the trigger of the gun.
- Make sure there are no persons in the area where the device
is to be used.
- Do not tilt your body to reach the product or stand on an
unstable support. Always keep good balance.
- Follow the maintenance instructions specified in this
manual.
- Make sure the product is placed on a stable surface during
operation, transport, assembly, or disassembly. Be careful
when moving it from one place to another to avoid damaging
it.
- In the event of an accident, switch off the appliance and
disconnect it from the mains immediately.
- Keep the nozzle of the device clear.
- Always wear safety goggles and protective clothing when
using or repairing the product. The use of hearing protection
is also recommended.
HIDROBOOST 1400 EASYGO
13
Publicidad
