cecotec HYDROBOOST 1400 EASYGO Manual De Instrucciones página 78

ENGLISH
7. TECHNICAL SPECIFICATIONS
Product reference: 08136
Product: Hydroboost 1400 EasyGo
Power: 1400 W
Voltage: 220-240 V~, 50/60 Hz
Rated pressure: 7 MPa (70 bar)
Max. pressure: 10.5 MPa (105 bar)
Vibration: ≤ 2.5 m/s
2
Nominal flow rate: 5.5 l/min
Max. flow: 7.1 l/min
Most common specific weight configuration: 6 kg
5 ºC - 50 ºC IPX5
Technical specifications may change without prior notification to improve product quality.
Made in China | Designed in Spain
8. DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES
This symbol indicates that, according to the applicable regulations, the
product and/or cells must be disposed of separately from household waste.
When this product reaches the end of its shelf life, you should dispose of the
cells/batteries/accumulators and take them to a collection point designated
by the local authorities.
Consumers must contact their local authorities or retailer for information
concerning the correct disposal of old appliances and/or their batteries.
Compliance with the above guidelines will help protecting the environment.
9. TECHNICAL SUPPORT AND WARRANTY
Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the
time of delivery of the product under the terms, conditions, and deadlines established by the
applicable regulations.
It is recommended that repairs be carried out by qualified personnel.
If at any moment you detect any problem with your product or have any doubt, do not hesitate
to contact Cecotec's official Technical Support Service at +34 963 210 728.
78
HIDROBOOST 1400 EASYGO