Stihl MS 880 Manual De Instrucciones página 34

English
N
Press the button, the
decompression valve will be
opened
The decompression valve is closed
automatically when the engine starts for
the first time. For this reason, press the
button again before each additional
starting procedure.
32
0
1
4
N Push the hand guard (1) forwards –
the saw chain is blocked
N
Simultaneously press the throttle
trigger interlock (2) and throttle
trigger (3) – set master control
lever (4)
Position choke shutter closed l
– if engine is cold (even if the engine
has stalled during opening of
throttle after starting)
Position starting acceleration n
– if engine is warm (once the engine
has been running for approx. one
minute)
N
Hold and start the chain saw
When the engine has turned over for
the first time
STOP
2
N
Move the Master Control lever (1) to
the position starting acceleration n
3
N Press the button on the
decompression valve
N Hold and start the chain saw
Once the engine is running
N Blip the throttle trigger (2); the
Master Control lever (1) jumps to
the operating position F and the
engine begins to idle
STOP
0
1
STOP
0
1
2
MS 880