Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
9
Deinstallation
en
9.1
Sensor replacement/data storage
10
Disposal
60
O P E R A T I N G I N S T R U C T I O N S | WTM4S
•
Clean the optical interfaces and housing
•
Check the fittings and plug connectors
Cleaning
NOTICE
Equipment damage due to improper cleaning.
Improper cleaning may result in equipment damage.
Only use recommended cleaning agents and tools.
■
Never use sharp objects for cleaning.
■
Clean the optical surfaces at regular intervals and, in the event of contamination,
►
with a lint-free lens cloth (part number 4003353). The cleaning interval essentially
depends on the ambient conditions.
No modifications may be made to devices.
Subject to change without notice. Specified product properties and technical data are
not written guarantees.
All IO-Link devices have a backup and restore functionality - Data Storage (DS). The
IO-Link Data Storage function can be used to save previous parameters and transmit
them to the replacement device.
The prerequisite for this is connection of the device to an IO-Link Master, and activation
of the storage function in the IO-Link Master.
Details on sensor replacement can be found in the detailed IO-Link description:
cal Information: Photoelectric sensors, SICK Smart Sensors /
The sensor must be disposed of in line with applicable country-specific regulations.
When disposing of them, you should try to recycle them (especially the precious met‐
als).
NOTE
Disposal of batteries, electric and electronic devices
•
According to international directives, batteries, accumulators and electrical or
electronic devices must not be disposed of in general waste.
•
The owner is obliged by law to return this devices at the end of their life to the
respective public collection points.
•
WEEE:
This symbol on the product, its package or in this document,
indicates that a product is subject to these regulations.
Techni‐
IO-Link.
8028212/2023/10/20 | SICK
Subject to change without notice
Publicidad
