Johnson JDMV3 Serie Manual De Instrucciones página 56

CARE AND MAINTENANCE
CAUTION
Cleaning Your Indoor Unit
• Always TURN OFF your AC system and disconnect its power supply before
cleaning or maintenance.
• Only use a soft, dry cloth to wipe the unit clean. You can use a cloth soaked in
warm water to wipe it clean if the unit is especially dirty.
• Do not use chemicals or chemically treated cloths to clean the unit
• Do not use benzene, paint thinner, polishing powder or other solvents to clean
the unit. They can cause the plastic surface to crack or deform.
• Before changing the filter or cleaning, turn off the unit and disconnect its
power supply. Removal and maintenance must be performed by a certified
technician.
• When removing filter, do not touch metal parts in the unit. The sharp metal
edges can cut you.
• Do not use water to clean the inside of the indoor unit. This can destroy
insulation and cause electrical shock.
• Do not expose filter to direct sunlight when drying. This can shrink the filter.
• Any maintenance and cleaning of indoor unit should be performed by an
authorized dealer or a licensed service provider.
• Any unit repairs should be performed by an authorized dealer or a licensed
service provider.
• Cannot be maintained and cleaned by the user.
Maintenance your AC.
Maintenance –
Long Periods of Non-Use
If you plan not to use your air conditioner for
an extended period of time, do the following:
Turn off the unit and
disconnect the power
Turn on FAN function until
unit dries out completely
Maintenance –
Pre-Season Inspection
After long periods of non-use, or before
periods of frequent use, do the following:
Check for damaged wires
Make sure nothing is blocking
all air inlets and outlets
9
Check for leaks
V.1