Johnson JDMV3 Serie Manual De Instrucciones página 62

MANUAL button: This button selects the mode in the following order:AUTO,FORCED COOL,OFF.
FORCED COOL mode: In FORCED COOL mode, the Operation light flashes. The system will
then turn to AUTO after it has cooled with a high wind speed for 30 minutes. The remote control will
be disabled during this operation.
OFF mode: When the display panel is turned OFF, the unit turns off and the remote control is
re-enabled.
Operating Conditions
When your air conditioner is used outside of the following temperature ranges, certain safety protection
features may activate and cause the unit to disable.
Inverter Split Type
Room Temperature
Outdoor
Temperature
Size of connecting pipe
Parts you must purc hase separately. Consult the dealer about the proper pipe size of the unit you
purchased.
Name
Connecting pipe
assembly
COOL mode HEAT mode
17°C - 32°C 0°C - 30°C
(62°F - 90°F) (32°F - 86°F)
0°C - 50°C
-15°C - 24°C
(32°F - 122°F)
(5°F - 75°F)
-15°C - 50°C
-20°C - 24°C
(5°F - 122°F) (-4°F - 75°F)
(For special
(For models with
tropical models)
low temp. cooling
systems.)
0°C - 52°C
(32°F - 126°F)
(For special
tropical models)
Liquid side
Gas side
DRY mode
10°C - 32°C
(50°F - 90°F)
0°C - 50°C
(32°F - 122°F)
0°C - 52°C
(32°F - 126°F)
(For special
tropical models)
Size
Φ
6.35( 1/4 i n)
Φ
9.52( 3/8in)
Φ
12.7( 1/2in)
Φ
9.52( 3/8in)
Φ
12.7( 1/2in)
Φ
16( 5/8in)
Φ
19( 3/4in)
Φ
22( 7/8in)
15
FOR OUTDOOR UNITS
WITH AUXILIARY
ELECTRIC HEATER
When outside
temperature is below 0°C
(32°F ), we strongly
recommend keeping the
unit plugged in at all
time to ensure smooth
ongoing performance.
V.1