Johnson JDMV3 Serie Manual De Instrucciones página 86

NOTE ON AIR SWITCH
When the maximum current of the air conditioner is more than 16A, an air
switch or leakage protection switch with protective device shall be used
(purchased seperately). When the maximum current of the air conditioner
is less than 16A, the power cord of air conditioner shall be equipped with
plug (purchased seperately). In North America the applicance should be
wired according toNEC and CEC requirements.
(A)
Air switch
(purchased seperately)
Outdoor unit power wires Indoor & Outdoor
Outdoor unit
(C)
Air switch
(purchased seperately)
Indoor unit power wires
Outdoor unit power wires
Outdoor unit
Indoor & Outdoor
connective wires
(purchased seperately)
NOTE: The cographs are for explanation purpose only. Your machine may be
slightly different. The actual shape shall prevail.
OUTDOOR UNIT WIRING
WARNING
Before performing any electrical or wiring work, turn off the main power to the system.
1. Prepare the cable for connection
a. You must first choose the right cable
size. Be sure to use H07RN-F cables.
connective wires
(purchased seperately)
Indoor unit
Air switch
(purchased seperately)
Indoor unit
NOTE: In North America, choose the cable
type according to the local electrical codes
and regulations.
(B)
Indoor unit power wires
Outdoor unit
Indoor & Outdoor
connective wires
(purchased seperately)
(D)
Only for the North American
Air switch
(purchased seperately)
Outdoor unit power wires
Outdoor unit
Air switch
(purchased seperately)
39
Air switch
(purchased seperately)
Indoor unit
Indoor & Outdoor
connective wires
(purchased seperately)
Indoor unit
V.1