cecotec CECOFRY DUOHEAT 6000 Manual De Instrucciones página 49

1. PARTS AND COMPONENTS
Fig. 1
1. Control panel
2. Air inlet
3. Upper housing
4. Basket
5. Rack
6. Basket handle
7. Bottom heating element
8. Upper heating element
9. Interior light
10. Glass window
11. Air outlet
12. Coil bracket
13. Power cable
NOTE:
the graphics in this manual are schematic representations and may not exactly match the
device.
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the device out
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the device when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the Official Cecotec Technical Support Service
immediately.
Before first use
- Remove all packaging materials.
- Take the product out of the box and remove all labels.
- Clean the basket and the basket drawer with hot water, detergent, and a non-abrasive
sponge.
- Use a damp cloth to clean both the outside and inside of the air fryer. This is a hot air
fryer, so do not pour oil into the basket.
- Place the appliance on a horizontal, stable, flat, and heat-resistant surface.
ENGLISH
CECOFRY DUOHEAT 6000
49