Descargar Imprimir esta página

Denon DVD-700 Instrucciones De Funcionamiento página 11

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 118
FUNCTIONAL OVERVIEW
Display
Lights when repeat
title function is on.
Lights when
the repeat function is on.
Lights when
the A-B repeat
function is on.
Lights
when the inserted
disc is being played back.
Displays During Operation
Power on
No disc inserted
Tray open
Tray closed
Loading the Disc
Power off
Lights when playback
of the inserted disc comes
is paused.
– 11 –
Lights when the repeat chapter
function is on.
Lights when the repeat track function is on.
Lights up when a DVD
is inserted on the tray.
CD:
Lights up when a CD is inserted
on the tray.
VCD:
Lights up when a Video CD is
inserted on the tray.
Lights up when playback control is
activated.
Displays how long the current title or track has been
played back. When the chapter or track switches, the
number of the new title, chapter or track is displayed.
Loading the Batteries
1. Open the battery compartment cover.
2. Insert two "AA" (R6P) batteries, with
each one oriented correctly.
3. Close the cover.
NOTES
• Do not mix alkaline and manganese batteries.
• Do not mix old and new batteries.
Cautions on Batteries
• Use "AA" (R6P) batteries in this remote control unit.
• Replace the batteries with new ones approximately
once a year, though this depends on the frequency
with which the remote control unit is used.
• If the remote control unit does not operate from
close to the main unit, replace the batteries with
new ones, even if less than a year has passed.
• The included battery is only intended for verifying
operation. Replace it with a new battery as soon as
possible.
• When inserting the batteries, be careful to do so in
the proper direction, following the
in the remote control unit's battery compartment.
• To prevent damage or battery fluid leakage:
• Do not use a new battery with an old one.
• Do not use two different types of batteries.
• Do not short-circuit, disassemble, heat or dispose
of batteries in flames.
• Remove the batteries when not planning to use the
remote control unit for a long period of time.
• If the batteries should leak, carefully wipe off the
fluid from the inside of the battery compartment,
and then insert new batteries.
and
marks
EN

Publicidad

loading