Publicidad
Idiomas disponibles
Idiomas disponibles
CONNECTIONS
Description - rear panel
2
1. DIGITAL OUT JACKS:
Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver. Use to connect to a Dolby
Digital decoder or DTS decoder.
2. AUDIO OUT JACKS
Connect to the Audio input jacks of A/V-compatible TV or wide screen TV, Stereo system.
3. VIDEO OUT JACKS
Use a video cable to connect one of the jacks to the Video input on your A/V-compatible TV or wide screen
system.
4. COMPONENT VIDEO OUT JACKS
Use these jacks if you have a TV with Component Video in jacks. These jacks provide C
Video, Component Video provides the best picture quality.
5. S-VIDEO OUT JACK
Use the S-Video cable to connect this jack to the S-Video jack on your A/V-compatible TV or wide screen TV for a higher
quality picture.
6. AV1 JACK
Connect to the 21-pin scart jack of a TV.
NOTES
• Be sure not to use both AV1 jack and component Video jacks for video output at the same time.
• When changing the VIDEO OUT setting (SCART or COMPONENT), use a VIDEO jack or an S-VIDEO jack to connect to
the TV. If the setting is changed, for example, to COMPONENT while AV1 jack is used to connect to the TV, the distorted
video signal may be output.
Manufactured under license from Dolby
Laboratories. "Dolby" and the double-D symbol
are trademarks of Dolby Laboratories.
1
3
4
5
"DTS" and "DTS Digital Out" are trademarks of
Digital Theater Systems, Inc.
– 12 –
AV1
6
TV, Stereo
, C
and Y video. Along with S-
R
B
EN
Publicidad
