Descargar Imprimir esta página

Denon DVD-700 Instrucciones De Funcionamiento página 18

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 118
PLAYING A DISC
A-B REPEAT
1
Press the A-B REPEAT button
at your
chosen starting point.
A- appears briefly on the TV
screen.
2
Press the A-B REPEAT button
again at your chosen end point.
A-B appears briefly on the TV
screen, and the repeat sequence
begins.
3
To exit the sequence, press the
A-B REPEAT button.
NOTES:
The A-B repeat section can only be set within the current
title (for DVDs) or current track (for audio CDs/video CDs).
A-B Repeat does not work with some scenes on DVDs.
To cancel the A point which was set, press the CLEAR button.
A-B Repeat playback does not function during title, chap-
ter, track or all repeat playback.
DVD-V
CD
VCD
A -
A - B
OFF
Programming
You may determine the order in which tracks will play.
1
In the stop mode, press the MODE button.
• The PROGRAM screen will
appear.
2
Press the cursor buttons
(L or M) to select a track,and
then press the ENTER button.
• Press the CLEAR button to erase
the most recently entered pro-
gramme.
3
Press the PLAY button to play the programmed
tracks.
NOTES:
While the programme is being played back, the STOP button works
as follows.
Press the STOP button once and then the PLAY button again,
playback will restart from the point where the STOP button
was pressed. (Programme continued)
Press the STOP button twice and then the PLAY button again,
playback will restart from the track in the usual way.
(Programme cleared)
Up to 99 programmes can be entered.
If you wish to repeat the current track in the programme,
press the REPEAT button repeatedly until
appears during playback. If you wish to repeat the entire
programme press the REPEAT button repeatedly until
ALL appears during playback.
Refer to page 21 for programme playback of MP3, WMA,
and JPEG discs.
Random Playback
This shuffles the playing order of tracks instead of playback
them in the original sequence.
1
In the stop mode, press the
RANDOM or MODE button
twice.
• The RANDOM screen appears.
2
Press the PLAY button to start random playback.
NOTES:
If you wish to repeat the current track in the random selec-
tion, press the REPEAT button repeatedly until
appears during playback. If you wish to repeat the entire
random selection, press the REPEAT button repeatedly
until
ALL appears during playback.
Refer to page 20 for random playback of MP3, WMA, and
JPEG.
– 18 –
CD
PROGRAM
CD [AUDIO]
TOTAL 0:03:30
1 3:30
1 3:30
2 4:30
3 5:00
4 3:10
5 5:10
6 1:30
7 2:30
1/1
1/2
1 3:30
TRACK
CD
RANDOM
CD [AUDIO]
TOTAL 0:45:55
RANDOM PROGRAM
--no indication--
TRACK
EN

Publicidad

loading