Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
If [Failed.] or [DISC BURN failed.] appears on the screen, insert another disc into the DVD writer and
perform the DISC BURN operation again.
If the total memory size of movies to be burnt by the DISC BURN operation exceeds that of the disc, disc
creation stops when the limit is reached. The last movie on the disc may be cut off.
Disc creation time to dub movies to the limit of the disc is about 20 minutes to 60 minutes. It may take
more time depending on the recording mode or the number of scenes.
Customizing a disc with DISC BURN OPTION
Perform this operation in the following cases:
When dubbing a desired image
When creating multiple copies of the same disc
When dubbing images in the memory card (DCR-SR21)
Select [DISC BURN OPTION] on the screen in step 3.
Select the recording media containing the movie(s) you want to save (DCR-SR21).
Select the movie you want to burn on the disc.
Select
[YES] on the camcorder screen.
After the operation is completed, select [EXIT] [END].
Playing back a disc on the DVD writer
When play back movies on the TV screen, connect the camcorder to a TV.
Insert a created disc into the DVD writer.
Press the play button on the DVD writer.
Select [END] [EJECT DISC] on the screen and remove the disc after the operation is
completed.
If you cannot play back created discs on any DVD player, connect the camcorder to the DVD writer, and
then play back.
US
Remaining Disc capacity
Publicidad
Capítulos
Tabla de contenido
Solución de problemas
