Publicidad
Thermo Scientific
Chapter 4 Operation
Controller
The Thermo Scientific Precision Water Baths have digital controllers that display the bath's
reservoir fluid temperature, shaker speed and other bath features.
Indicates the heater is on. The icon flashes when the reservoir fluid temperature is
near or at the set point.
Indicates the timer is enabled. The timer is used to turn the bath on, off, or both.
Indicates the audible alarm status, enabled or disabled.
4
Chapter 4
Operation
|
Once the circuit protector
on the back of the bath is
on, press to start/stop the
bath.
Press the two navigation
arrows to move through
the controller displays and
to adjust values.
Press a soft key to select
additional displays.
4-1
Precision
|
Publicidad
