Behncke PWT 510 Instrucciones De Operación página 48

Heat exchanger PWT 510 / PWT 910 / Safety
2 Safety
This section gives an overview of all the important safety aspects to provide optimal protection for people,
as well as for safe and error-free operation. Failure to follow the instructions and safety information in this
manual may result in significant danger.
Carefully read this section before carrying out any work on the plate heat exchanger!
Follow all the safety information!
If you have any questions regarding the safety information, please contact the manufacturer!
2.1 Proper use
Claims of any kind resulting from misuse are excluded!
6
IMPORTANT!
Proper use also includes
• following all the instructions in the instruction manuals and the instruction
manuals for the product's individual components.
• complying with inspection and maintenance works.
The plate heat exchanger may only be operated using non-hazardous fluids
(fluid group 2 according to Pressure Equipment Directive 2014/68/EU).
Observe the maximum temperature and maximum operating pressure on the
plate heat exchanger type plate.
The plate heat exchanger may only be put into operation by a specialist.
The plate heat exchanger may only be operated by trained individuals.
WARNING!
Danger from misuse!
Only use original replacement parts.
For safety reasons, modifications and alterations to the plate heat exchanger
and its components are prohibited without consulting the manufacturer.
For safety reasons, approved modifications and alterations may only be carried
out by specialists.