Publicidad
Idiomas disponibles
Idiomas disponibles
18
EN
Basic
Recording
Features
E
C
1
–
0000
1
E
2
–
Downloaded from:
https://www.usersmanualguide.com/
E
B
2
–
1
STOP/EJECT
–
A
1
2
3
2
4
5
6
7
8
9
4
0
STOP ( 7 )
D
BASIC PLAYBACK AND RECORDING (cont.)
Changing display information
A
Press – –:– – on the Remote during recording or
recording pause.
Each time you press the button, the front display panel
shows the time counter, tape remaining time, channel
number and the clock time in sequence.
Time Counter
Clock Time
● To display the VCR status including the time counter,
channel number, and the clock time on the TV screen,
see "Showing on-screen display" (
● "COUNT" appears on the screen when the time
counter is shown. "REMAIN" appears on the screen
when the tape remaining time is shown.
● The approximate tape remaining time appears and the
"
" indicator lights on the front display panel.
● The tape remaining time is calculated based on the
tape speed (SP or EP) being used. The indicated
( 7 / 0 )
remaining time is only an estimate.
To reset the time counter, press 0000 on the Remote.
The counter reading becomes "0:00:00". It is also reset
when a tape is inserted.
Specifying recording length
B
—
You can easily specify the recording length from 30
minutes to 6 hours and the VCR shuts off after recording
is finished.
During recording, press REC ( ¶ ) on the front panel
repeatedly until the recording length you want appears
on the front display panel.
The
(record) indicator starts flashing.
Each time you press the button, recording length
increases in 30-minute intervals (up to 6 hours).
To cancel an ITR, press STOP ( 7 ) on the Remote or
STOP/EJECT ( 7 / 0 ) on the front panel.
Watching one program while
C
recording another
1
Engage TV mode
During recording...
● If you connect the TV and the VCR only using
the RF connection (
from the VCR
Press TV/VCR on the Remote so that VCR mode
indicator goes off from the front display panel.
The TV broadcast being recorded disappears.
● If you are using the AV connection (
view pictures from the VCR, change the TV's
input mode from AV to TV.
2
Select channel for viewing
Select the channel, you want to watch, on the TV.
Tape Remaining Time
Channel No.
Instant Timer Recording (ITR)
pg. 5) to view pictures
pg. 19).
pg. 5) to
Publicidad
