Publicidad
Idiomas disponibles
Idiomas disponibles
You can use a camcorder as the playback VCR and your
VCR as the recording VCR.
1
Make connections
Connect an audio/video cable between the
camcorder's audio/video output connectors and
your VCR's audio/video input connectors.
● When the JVC camcorder is equipped with the
Master Edit Control, you can control the VCR
from the camcorder. Connect the mini-plug
cable (not supplied with this VCR) as illustrated
to the left.
● If connecting a camcorder with an S-VIDEO
output connector, it is recommended to use the
S-VIDEO connection to minimize picture
degradation while editing.
● When using a camcorder with a monaural
output, connect the audio output connector on
the camcorder to the left audio input connector
on this VCR.
2
Load a cassette
Insert the cassette to be recorded on into this
VCR (for recording).
3
Select input mode on this VCR
Select "L-1" — when connecting the camcorder
Select "F-1" — when connecting the camcorder
On the front panel:
Press CH5∞.
On the Remote:
Press the Number key "0 (AUX)" or PR +/–.
4
Access Main Menu screen on this VCR
Press MENU
5
Access Function Set screen
Press CH 5∞ on the front panel or %fi on the
Remote to move the highlight bar (arrow) to
"FUNCTION SET", then press OK or # on the
Remote.
6
Select aux input set mode
Follow the procedure described on pages 30 and
34.
When using S VIDEO terminal, set "FRONT AUX
INPUT" (or "REAR AUX INPUT" if you use the
connectors on the rear) to "S-VIDEO".
When using VIDEO terminal, set "FRONT AUX
INPUT" (or "REAR AUX INPUT") to "VIDEO".
Downloaded from:
https://www.usersmanualguide.com/
to the audio/video input
connectors on the rear panel.
to the audio/video input
connectors on the front panel.
on the Remote
.
7
Set "PICTURE CONTROL" to "EDIT"
Follow the procedure described on pages 30 and
31.
If your camcorder is a JVC Master Edit Control-
equipped type — go to step 5.
If your camcorder is NOT a JVC Master Edit
Control-equipped type — go to step 6.
8
Set "AV COMPU-LINK" to "OFF"
Follow the procedure described on pages 30 and
31.
● The PAUSE/AV COMPU-LINK connector works
as the Remote Pause connector when "AV
COMPU-LINK" is set to "OFF".
9
Return to normal screen
Press MENU.
0
Start playback
Press PLAY ( 3 ) on the camcorder.
NOTE:
If the camcorder is equipped with a superimpose/OSD
disable feature then set it to "OFF" before starting
playback.
!
Start recording
On the front panel:
Press REC ( ¶ ).
On the Remote:
Press REC ( ¶ ) and PLAY ( 3 ).
● If you are using a Master Edit Control-equipped
JVC camcorder, recording starts automatically
on this VCR. (Refer to camcorder's instruction
manual.)
NOTE:
Be sure to select "AUTO" for "PICTURE CONTROL" (or
"NORM" when "B.E.S.T." is set to "OFF") after you finish
dubbing the tapes (
pg. 30 and 31).
37
EN
Publicidad
