Publicidad
Idiomas disponibles
Idiomas disponibles
4
Input receiving channel number
The guide channel
number, which is
assigned to the TV or
cable station for the
PlusCode number that
you entered in step 3,
will appear
automatically on the
Guide Channel Set screen.
Press the Number keys (or PR +/– or %fi) to input
the number of the channel on which the
broadcast for the PlusCode number is received
on the VCR or cable box, then press OK.
● The Guide Channel Set screen appears only
when you input the PlusCode number of a
station for which the guide channel number has
not been set previously.
5
Check program date
The PlusCode number
you entered and the
corresponding timer
recording program is
displayed on the
Program screen. Check
to make sure it is
accurate.
● To change the stop time, press STOP +/–.
● To timer-record daily (Monday–Friday) or
weekly serials, press DAILY (M-F) (number "8")
or WEEKLY (number "9"). "DAILY" or
"WEEKLY" appears on the Program screen.
Pressing the button again makes each
corresponding display disappear.
● If you made a mistake, press
VCR Plus+ screen again and input the correct
PlusCode number.
● If an incorrect PlusCode number or the one for
a broadcast already finished has been inputted,
"ERROR" is displayed for about 5 seconds, then
the VCR Plus+ screen reappears.
6
Set tape speed
Press
(SP/EP).
Downloaded from:
https://www.usersmanualguide.com/
GUIDE CHANNEL SET
GUIDE CH: 12
VCR CH : – ––
PRESS NUMBER KEY (0–9)
OR (5,∞), THEN (OK)
PRESS (PROG.) TO END
PROGRAM 1
(VCR PLUS+ 12345678)
START
STOP
8:00PM
= 10:00PM
DATE
CH
12/24/00
12 SP
SUN
PRESS (8=DAILY, 9=WEEKLY
STOP+/– = STOP TIME, SP/EP)
PRESS (PROG.) TO END
to access the
7
Return to normal screen
Press PROG or OK.
"PROGRAM COMPLETED" appears on the
screen for about 5 seconds, then normal screen
appears.
• If "PROGRAM NOT COMPLETED PROGRAM
OVERLAP" appears, you have another program
overlapping the program you have just made.
The Program Check screen appears and
conflicting programs will start blinking.
You can now correct the conflicting programs.
See "When programs overlap each other" on
page 29.
8
Engage timer recording standby mode
Press ‰ ‰ ‰ ‰ ‰ .
The VCR turns off automatically and "‰" is
displayed on the front display panel.
To use the VCR while it is in timer recording standby
mode
Press ‰ ‰ ‰ ‰ ‰ to cancel the timer recording standby mode,
then press
to turn on the VCR.
DO NOT forget to put the VCR into timer recording standby
mode again by pressing ‰ ‰ ‰ ‰ ‰ after you use the VCR; otherwise,
you cannot record the broadcasts you want.
● When "AUTO TIMER" (
timer recording standby mode is automatically engaged
when the VCR is turned off. It is temporarily canceled
when the VCR is turned on. You do not have to press ‰ ‰ ‰ ‰ ‰
to engage or disengage the timer recording standby mode.
IMPORTANT
If you have moved to a different area or if a broadcasting
station's channel number has been changed, the wrong
VCR CH or CABLE CH number will be displayed on the
Program screen in step 5. When this happens, set the
correct guide channel number for that station. (
"Changing VCR Plus+ Setting")
NOTES:
● In case of a power failure after programming, the VCR's
memory backup keeps your selections (if the lithium battery is
not exhausted).
● To timer-record cable channels received through a cable box,
be sure to keep the cable box turned on.
23
EN
pg. 31) is set to "ON", the
pg. 24,
Publicidad
