Technical Data; Parts Of The Machine; Operation; Settings - Festool ROTEX RO 90 DX FEQ Manual De Instrucciones

ronment. The machine must only be used for
dry sanding.
The user is liable for improper or non-in­
tended use.
5

Technical data

Geared eccentric sander
Power
Speed
Eccentric motion
Rotex rotary mo­
tion
Sanding stroke
FastFix sanding pad dia.
Weight as per EPTA proce­
dure 01:2014
6

Parts of the machine

[1-1] Protector
[1-2] Selector switch/spindle stop
[1-3]
On/off switch
[1-4] Mains power cable
[1-5]
Extractor connector
[1-6] Speed control
[1-7]
Sanding pad
[1-8] Stop rod
[1-9] Polishing pad*
[1-10] Delta sanding pad
[1-11] Slat sanding pad*
[1-12]
Interface pad*
* Accessories shown or described are not al­
ways included in the scope of delivery.
The pictures for the functional description are
on a fold-out page at the beginning of the in­
struction manual. While reading the manual
you can fold out the page for comparison and
quick reference.
RO90 DX FEQ
400 W
3000 - 7000 min
-1
220 - 520 min
-1
0.12" (3.0 mm)
3.54" (90 mm)
3.2 lbs (1.45 kg)
7

Operation

WARNING
Unauthorised voltage or frequency.
Risk of accidents
► The mains voltage and the frequency of the
power source must correspond to the
specifications on the machine's name
plate.
► In North America, only Festool machines
with the voltage specifications 120 V/60 Hz
must be used.
CAUTION
Heating of the Plug it connection if bayonet
fitting is not completely locked
Risk of burns
► Before switching on the power tool, make
sure that the bayonet fitting at the mains
cable is closed fully and locked.
Connecting and disconnecting the mains power
cable [1-4] see fig. [2].
The switch [1-3] serves as an on/off switch (I =
ON, 0 = OFF).
The on switch can only be actuated if
the selector switch [1-2] is locked in
place.
In case of a power failure or if the
mains connector is removed, move
the on/off switch immediately to the
Off position. This prevents uncontrol­
led restarting.
8

Settings

WARNING
Risk of injury, electric shock
► Always disconnect the mains plug from the
socket before performing any work on the
machine.
English
2
9