Publicidad
Idiomas disponibles
Idiomas disponibles
Ingeteam
5. Preparation for installing the unit
When deciding the location of the unit and planning your installation, you must follow a set of guidelines based on
the specifications of the unit. These guidelines are summarized in this chapter.
5.1. Environment
•
Place the units in a place that is accessible for installation and maintenance work and which allows
operating through the TFT display.
•
The air vents and part of the power module can reach high temperatures. Do not place any material
nearby which is sensitive to high air temperatures.
•
Avoid corrosive environments that may affect its proper operation. Do not install the unit in areas
classified as ATEX.
•
Never place any object on top of the unit.
•
It is recommended to place the units under a cover that protects them from direct radiation, placing the
front part facing north in the Northern Hemisphere and facing south in the Southern Hemisphere.
•
Keep the following minimum distances free of obstacles.
32
1 0
0 c
m
c m
8 0
1 0
Minimum clearance distances
Preparation for installing the unit
m
0 c
0 c
m
300000772 - Monterings- och bruksanvisning
Publicidad
