Ingeteam RAPID 60 Manual De Instalacion Y Uso página 47

Connection of accessories
c. The detector must be tared with the standard parameters which are defined in the figure below. If the
special features of the installation require a different taring, please refer to the appliance user manual.
4. Follow the detector manufacturer's instructions to connect the vehicle detection coils.
7.5. 4G communications kit
CAUTION
To install the kit it is necessary to access the unit, following the safety instructions given in this manual. The
unit must not be powered.
Follow the connection process below to enable 4G communication in the charging station.
1. Firstly, insert the 4G card into the J31 port on the electronic card –KZ1 (ABX0011).
300000772 - Monterings- och bruksanvisning
ON OFF
1
2
3
4
5
6
7
8
Detector configuration
J52
J31
Ingeteam
EN
ES
FR
IT
SV
47