Publicidad
Idiomas disponibles
Idiomas disponibles
Ingeteam
8. Charger power supply connection
This chapter explains the requirements and process for connecting the power supply cabling to the unit. The
circuits for DC and AC (if available) charging and the auxiliary services power supply are derived internally from
this connection. Read carefully before starting the connection process.
INFO
Consult section
„Important safety instructions"
8.1. Safety instructions for the AC connection
DANGER
Make sure there is no voltage present on the unit before starting the AC connection.
Do not switch on the power to the unit until you have successfully made the rest of the connections and it is
closed.
Use the Personal Protective Equipment specified in section
During the connection, ensure the correct connection of the cables to the corresponding connection terminals.
It is essential to correctly replace the IP2X protections once the AC connections have been made.
-A
-B
-R
-S
-L1
-L2
50
and the following instructions before working on the unit.
-C
-T
-N
-L3
-L4
Charger power supply connection
„Personal Protective Equipment
300000772 - Monterings- och bruksanvisning
(PPE)".
Publicidad
