Ingeteam RAPID 60 Manual De Instalacion Y Uso página 56

Ingeteam
10.2. Remote connection
The purpose of remote connection is to have access to the charger when the charger and the computer are
connected to the Internet from different communication networks. The charger must be connected to the Internet
via Wi-Fi, Ethernet or 4G.
To make the connection, follow these steps:
1. With the charger and the computer connected to Internet, open the web browser and go to
http://ipChargingStation:8080/ where ipChargingStation is the IP of the charger. Therefore, you will need
the IP of the charger.
2. Enter the username and password. The username and password are specified on the documentation
delivered with the unit.
56
Unit configuration
300000772 - Monterings- och bruksanvisning