Assembly - Corghi ARTIGLIO 50 Manual De Uso

Ocultar thumbs Ver también para ARTIGLIO 50:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Before removing the machine from the pallet, make sure the items shown below
have been removed from the pallet.

3.1. ASSEMBLY

- Remove the top part of the card-
board packaging. Make sure that
the machine has not been dam-
aged in transit, and identify the
points at which it is anchored to
the pallet (fig. 4), ready to remove
the machine.
- The machine comprises five main
sections (fig.4):
1. Body with pedal unit and
turntable.
2. Column with bead breaking unit
and tool arm.
3. Air tank (T.I. version only).
4. Wheel lift (Optional).
5. Accessories box.
- Remove the packaging from the
air tank and/or any optional units,
and place them in a position
where they cannot fall over and
be damaged.
- Reassemble the tool head lifting
cylinder as shown in figure 4a.
Artiglio 50/55 User Manual
NOTICE
5
1
- Screw back on the bracket which supports the bead
breaker drive unit (fig. 4b).
4a
2
3
4
4
UK
4b
105

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Artiglio 55

Tabla de contenido