Corghi ARTIGLIO 50 Manual De Uso página 144

5. Pull up on the tyre lightly to reduce the gap between the upper bead and the rim
(Fig. 44d).
6. Step down on the air inflation pedal (3, Fig. 44c) and at the same time press the 2 but-
tons on the accessory to release a high-pressure air blast through the four jets to assist
in seating the beads of the tyre (Fig. 44e).
To increase the effectiveness of the inflation jets, always liberally lubricate beads
and raise the lower bead while activating inflation jets.
To improvethe operation of the tubeless tyre inflation system the compressed air
line pressure must be between 8/10 bar.
Step down on the pedal to inflate tire and seal beads with inflation hose. Frequently
stop to check bead seating pressure gauge.
144
2
44d
NOTICE
NOTICE
3
Artiglio 50/55 User Manual
4
5
44c
44e