Artiglio 50/55 Description - Corghi ARTIGLIO 50 Manual De Uso

These configurations may move during transport and the air can be released from the
actuating pneumatic cylinders.
Before making the connection to the pneumatic network, check the configuration of the
arms and controls as described in fig. 7a-7b.
No movement is obtained with this operation, but the pressure in the cylinders is
restored; the operations can be carried out after this initial phase.
Each time the machine remains disconnected from the pneumatic line for long periods,
check the direct operation of the controls with the relative arm, following the pressure
restoration procedure. Carry out the first control operation very slowly.

5. ARTIGLIO 50/55 DESCRIPTION

For ARTIGLIO 55 see the manual 4-133267.
The ARTIGLIO 50/55 is a universal electro-pneumatic tyre changer for car, off-road vehicle
and van wheels.
It is designed to work effectively on:
- Conventional wheels;
- Reverse rim wheels or wheels without central well - (using optional kit);
- Runflat tyres with reinforced sidewall - runflat tyres with internal support*.
Special working procedures have been specifically studied for these wheels' systems.
N.B. Clamping and/or demounting wheels in the vintage car category (cars out of
production for more than 30 years) and some types of rally wheels and wheels of cars
approved only for off-road use may be difficult and occasionally even impossible.
The ARTIGLIO 50/55 allows extremely easy bead breaking, demounting and mounting of
any type of tyre in the aforesaid categories having rim diameter from 12" to 30 ".
In all stages, the ARTIGLIO 50/55 works with the wheel horizontal, clamped and perfectly
centred on the turntable.
Artiglio 50/55 User Manual
NOTICE
WARNING
NOTICE
WARNING
UK
109