Bosch HDS252U Manual De Uso Y Cuidado página 10

Setting the CLock (after power to the range has been off)
Always set the clock after installation or after a power failure. Once power returns to the oven, the clock defaults to !2:00
am,
The time of day is displayed in hours and minutes.
The clock time will appear during all oven operations except when the timer or a timed cooking operation is running.
The oven is preset to a !2-hour clock and indicates AM or PN.
Note." To switch to a 24 hr. clock, seethe "SelectFunction" section,
page 7.
1. CLOCK witI be displayed and the hour digits witI flash.
Turn knob to select hour and AN or PN, Turning to the
right increases by 1 hour increments, turning to the left
decreases by 1 hour increments.
2. Touch TIME. CLOCK witI still be displayed and the
minute digits will flash.
3. Turn knob, Set minutes.
4. Touch TIME and the clock is now set.
Changing the ClockTime
!. Touch Time. TIMER lwiU flash in display.
2. Turn knobto select CLOCK.
3. Touch TIME again and hour digits will flash.
4. Turn knobtochange hours.
5. Touch TIME again and minute digits will flash.
6. Turn knob clockwise or counter-clockwise to change
minutes.
7. Touch TIME again and the clock is set.
Page 6